What are pallet support bars?
Pallet support bars drop into step beams front to back, giving extra support under pallets that do not span the beams safely, such as damaged or smaller pallets.
Specifications
| Item | Typical specification |
|---|---|
| Section | Formed channel |
Typical ranges from our factory. Final sizes, loads and finishes are confirmed in your quote and drawing.
Sizes at a glance
| Parameter | Range |
|---|---|
| Depths | 900 / 1,100 mm |
| Finish | Galvanised |
| Fits | Step beams |
| Use | Short or weak pallets |
| Fixing | Drop-in |
| Lead time | typically 6 to 8 weeks |
Options and customisation
- Drum chocks
Where it is used
- Mixed pallet types
- Euro pallets on UK-depth frames
Order quantities, lead time and delivery
There is no fixed minimum order. Full 20 ft or 40 ft containers give the lowest cost per bay, and mixed loads of racking, shelving and accessories are common. Typical lead time is 3 to 5 weeks production plus 5 to 7 weeks sea freight to a UK port, then delivery to your site; your quote confirms the dates. See lead times and delivery.
Samples and documents
We can send sample sections, such as a beam end and an upright offcut, so you can check profile and finish. Sample cost and courier are quoted by our sales team. Each order ships with our load tables, and test reports are available on request; see quality and standards.
Frequently asked questions
Do I need them?
Use them where pallets could slip between beams or where bottom boards run the wrong way.
Get a layout and quote for pallet support bars
Send your floor plan, pallet sizes and weights, or just a rough sketch. Our engineers return a proposed layout and an itemised factory-direct quote.
See all rack protection and accessories, read how we work or browse our racking guides.