Galvanised Pallet Racking
Pre-galvanised or hot-dip galvanised pallet racking for cold stores, wash-down areas and covered outdoor yards.
- CoatingPre-galvanised or hot-dip
- Temperaturedown to −30 °C
- Frame heights2,000 to 12,000 mm
- Beam lengths1,350 to 3,900 mm
- UseCold stores, humid and covered outdoor areas
- Lead timetypically 10 to 14 weeks
Prefer email? sales@aether-intl.com · Layout drawings welcome
What is galvanised pallet racking?
Galvanised pallet racking has a zinc coating instead of paint, which resists corrosion in cold stores, humid buildings and covered outdoor areas. It uses the same frames and beams as standard racking, so loads and dimensions are specified in the same way.
Specifications
| Item | Typical specification |
|---|---|
| Pre-galvanised | Z275 zinc coated strip, roll formed after coating |
| Hot-dip galvanised | Dipped after fabrication for heavier exposure |
| Fixings | Zinc-plated or hot-dip galvanised bolts and anchors |
| Documents | Coating specification and load tables with each order |
Typical ranges from our factory. Final sizes, loads and finishes are confirmed in your quote and drawing.
Sizes at a glance
| Parameter | Range |
|---|---|
| Coating | Pre-galvanised or hot-dip |
| Temperature | down to −30 °C |
| Frame heights | 2,000 to 12,000 mm |
| Beam lengths | 1,350 to 3,900 mm |
| Use | Cold stores, humid and covered outdoor areas |
| Lead time | typically 10 to 14 weeks |
Options and customisation
- Galvanised mesh decks
- Galvanised row spacers and pallet supports
- Hot-dip finish for outdoor yards
Where it is used
- Chilled and frozen food stores
- Breweries and drinks warehouses
- Covered builders merchant yards
Order quantities, lead time and delivery
There is no fixed minimum order. Full 20 ft or 40 ft containers give the lowest cost per bay, and mixed loads of racking, shelving and accessories are common. Typical lead time is 3 to 5 weeks production plus 5 to 7 weeks sea freight to a UK port, then delivery to your site; your quote confirms the dates. See lead times and delivery.
Samples and documents
We can send sample sections, such as a beam end and an upright offcut, so you can check profile and finish. Sample cost and courier are quoted by our sales team. Each order ships with our load tables, and test reports are available on request; see quality and standards.
Frequently asked questions
Pre-galvanised or hot-dip?
Pre-galvanised suits indoor cold and humid stores; hot-dip galvanising gives a thicker coat for outdoor or coastal sites.
Does galvanised racking carry the same loads?
Yes, capacity comes from the steel section; the coating is protection only.
Get a layout and quote for galvanised pallet racking
Send your floor plan, pallet sizes and weights, or just a rough sketch. Our engineers return a proposed layout and an itemised factory-direct quote.
See all pallet racking, read how we work or browse our racking guides.
