Row Spacers
Galvanised spacers that bolt back-to-back frames together at a fixed gap for stability and alignment.
- Lengths150 to 300 mm
- FinishGalvanised
- FixingBolted
- UseBack-to-back runs
- FitsCommon uprights
- Lead timetypically 6 to 8 weeks
Prefer email? sales@aether-intl.com ยท Layout drawings welcome
What are row spacers?
Row spacers bolt back-to-back racking frames together at a fixed gap, keeping runs aligned and adding stability to double-sided runs.
Specifications
| Item | Typical specification |
|---|---|
| Section | Formed steel |
Typical ranges from our factory. Final sizes, loads and finishes are confirmed in your quote and drawing.
Sizes at a glance
| Parameter | Range |
|---|---|
| Lengths | 150 to 300 mm |
| Finish | Galvanised |
| Fixing | Bolted |
| Use | Back-to-back runs |
| Fits | Common uprights |
| Lead time | typically 6 to 8 weeks |
Options and customisation
- Custom lengths
Where it is used
- All back-to-back racking
Order quantities, lead time and delivery
There is no fixed minimum order. Full 20 ft or 40 ft containers give the lowest cost per bay, and mixed loads of racking, shelving and accessories are common. Typical lead time is 3 to 5 weeks production plus 5 to 7 weeks sea freight to a UK port, then delivery to your site; your quote confirms the dates. See lead times and delivery.
Samples and documents
We can send sample sections, such as a beam end and an upright offcut, so you can check profile and finish. Sample cost and courier are quoted by our sales team. Each order ships with our load tables, and test reports are available on request; see quality and standards.
Frequently asked questions
How many per frame?
Usually two per frame pair, depending on height and the design.
Get a layout and quote for row spacers
Send your floor plan, pallet sizes and weights, or just a rough sketch. Our engineers return a proposed layout and an itemised factory-direct quote.
See all rack protection and accessories, read how we work or browse our racking guides.
